亞洲
說到過濾網筒大家都比較熟悉了，今天我們來聊一聊，同種材質的過濾網筒為什么不同廠家差異很大。不銹鋼過濾筒很多情況同樣的材質焊接出來的產品質量確不一樣，主要原因在于焊接技術的把握，針對這一問題，很多朋友或許都會問如何才能做好焊接這道工序并很好的解決這一問題，安平縣華納世通HNST從十幾年加工生產中積累了很多的實際有用的生產經驗，今日來分享一下保證不銹鋼過濾筒焊接牢固的方法，同時讓產品能愈加結實。咱們在工業制造當中生產的不銹鋼過濾筒選用不銹鋼絲網，不銹鋼沖孔網，不銹鋼鋼板網制成，其結構一般分為：不銹鋼絲網焊接成筒；不銹鋼絲網 不銹鋼沖孔網骨架；絲網 鋼板網骨架。
在焊接前，為了確保過濾筒的尺度精度，焊接效果，需求訂做一套模具，這套模具即為銅棒，依照過濾筒的內徑尺度做出一根銅棒，安裝在焊機上，將銜接處點焊或許滾焊，即可。必須注意的是：在焊接過濾筒的同時要把握好溫度和速度以及力度，這樣才干焊接處工藝漂亮，焊接結實的產品。
不銹鋼過濾筒樣式是多種多樣的，上面咱們提到了有的是獨自的過濾網焊接而成的，有的是選用單層沖孔網而成，有的是雙層或多層進行組合，不論是哪種在焊接時，咱們都要注意在加工生產之前，咱們一定要把焊接電流調整到位，以免出現漏焊或焊接電流過大的現象，多層組合的狀況，咱們需要根據材質以及厚度來挑選不同的焊接工藝，點焊，氬弧焊或離子焊，合理的挑選我們才能夠把產品焊接結實和完美。希望通過上面的介紹讓大家都可以買到心儀的產品。
After the filter tube we are more familiar with, today we will talk about, the same material of the filter tube why different manufacturers are very different. Stainless steel cartridge filters out many of the same material welding quality of the products is different, the main reason lies in the grasp of welding technology, in order to solve this problem, a lot of friends may ask how to do this procedure and good welding to solve this problem, anpingxian worldcom warner HNST from more than ten years production has accumulated a lot of practical production experience, Today to share the method to ensure the stainless steel filter cylinder welding firm, at the same time to make the product can be more solid. Two, the stainless steel filter cylinder produced by us in industrial manufacturing is made of stainless steel wire mesh, stainless steel punching net, stainless steel plate net. Its structure is generally divided into: stainless steel wire mesh welded into a cylinder; Stainless steel mesh stainless steel punching mesh frame; Wire mesh steel mesh frame.
Before welding, in order to ensure the scale accuracy and welding effect of the filter cylinder, a set of moulds is required, which is copper rod. A copper rod is made according to the inner diameter of the filter cylinder and installed on the welding machine. It must be noted that the temperature, speed and strength should be well grasped while welding the filter cylinder, so that the welding process can be beautiful and the welding product can be solid.stainless steel filter canister style is varied, the filter on the above mentioned we have a plenty of alone welded together, have a plenty of selection of single punching net, have a plenty of double layer or multilayer combination, whether it is a kind of when welding, we must pay attention to the before production, we must adjust the welding current is in place, In order to avoid the phenomenon of missing welding or welding current is too large, the situation of multi-layer combination, we need to choose different welding process according to the material and thickness, spot welding, argon arc welding or ion welding, reasonable selection we can weld the product solid and perfect. Hope that through the introduction of the above let everyone can buy the desired products.